Dako Artisan™ Link Pro - Manual (Page 68)

60 Dako Artisan™ Link | Basic User Guide
Note: The Cleaning dialog can also be accessed through the Artisan Control
Software (ArtiCS). The ArtiCS can be opened by double clicking on the
small Dako logo in the Windows system tray. The Artisan Control Software
dialog box displays.
From the Artisan Control Software (ArtiCS) display, click the Clean…
button to open the Cleaning dialog box.
Once the Cleaning Dialog box is displayed:
1. Follow the directions listed under Artisan Cleaning Procedure Instructions.
2. When steps 1 – 3 are complete, click the Start button.
The stainer scans the positions where the blank slide and reagent cleaning pack should be
placed.
• If the items are not found in the correct positions, the procedure is canceled so that the
items can be placed in the correct position.
• If the items are found in the correct positions, the cleaning process proceeds. During
the cleaning process, the status and remaining time are displayed.
3. When the cleaning procedure is complete, the cleaning progress dialog box closes and the
instrument turns off automatically.