Jeppesen Marine Workboat Navigator 1.3 User Manual
Page 15
Advertising
2 - Installation
2
-
Installation
2
-
Installation
11
Figure 2.10 appears if the IR2BB has not been installed. From this window,
you will be prompted to run the Chart Manager to install Professional+ Charts
and NavData. The Run Chart Manager check box is checked by default.
Jeppesen Marine recommends that you run Chart Manager at this time, or
you can remove the check-mark from the check box if you want to run Chart
Manager later.
Click Finish to complete the install and reboot or run Chart Manager, as so
selected.
Figure 2.10 - Setup Wizard - Setup Complete - Run Chart Manager
•
Advertising