Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 32)

28
Jeppesen Workboat Navigator Installer’s Guide
2
-
Installation
2
-
Installation
STEP 6. Start Workboat Navigator
Once you have installed Jeppesen Workboat Navigator and installed and configured
all hardware, you are now ready to display hardware-transmitted data on the target
computer using Jeppesen Workboat Navigator.
To start Jeppesen Workboat Navigator:
From the Start menu, select Start | Programs | Jeppesen Marine | Workboat
Navigator.
If you are using a Radar and IR2-BB, you must set up a Radar View in order
to see radar data. To configure Views, see the View Manager section in the
Jeppesen Workboat Navigator User’s Guide.
The Radar window pane should launch and automatically begin displaying radar
data. If you experience problems with the Radar which you cannot resolve using
this guide or the Jeppesen Workboat Navigator User’s Guide, please contact
Jeppesen Marine Technical Support.
1.
2.