Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 40)

36
Jeppesen Workboat Navigator Installer’s Guide
2
-
Installation
2
-
Installation
To add barges to your Tow configuration
Click on the string you wish to add a barge to.
Select the barge type to add from the list provided.
Click in the Add Barge to String radio button.
Click Add to Model.
Click OK to save your Tow Model settings and return to Boat Properties.
To move a Barge Forward, Aft, Port, or Starboard
Click on the Barge you wish to move.
Click the radio button next to Adjust...(Forward, Aft, Port, or Starboard).
Input the feet and inches you wish to move the Barge.
Click Refresh to updated the Tow Model graphic.
Click OK to save your Tow Model settings and return to Boat Properties.
To add a Hip Boat to your Tow configuration
In the Tow Model window, highlight a barge type.
Click Add Port/Starboard Hip Barge.
Click Add to Model.
The selected barge will be added to the Tow Model graphic parallel to your boat
to the Port or Starboard side.
Click OK to save your Tow Model settings and return to Boat Properties.
To remove a barge from your Tow configuration
Click on the Barge you wish to remove.
Click Remove Selected.
Click OK to save your Tow Model settings and return to Boat Properties.
NOTE:
If you make incorrect adjustments to a tow model, an error message
appears asking if you would like Workboat Navigator to auto correct the
tow model. You can cancel that error message and fix the tow model that
contains the incorrect adjustments.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.