Dell 2135cn Color Laser Printer - Manual (Page 117)

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document" .
2. Press until >FAX appears, and then press .
3. Adjust the document resolution to suit your fax needs (see "Adjusting the Document Resolution" ).
If you need to change the contrast, see "Lighter/Darker" .
4. Press until Delayed Start appears.
5. Press to select On, and then press .
6. Enter the start time using the number keypad, and then press .
7. Press until Phone Number appears.
8. Enter the number of the remote machine using the number keypad, and then press .
To enter the number, you can use speed dial or group dial numbers. For details, see "Automatic Dialing" .
Press to scan data.
Once Delayed Start mode is activated, your printer stores all of the documents to be faxed into its memory and sends them at the specified time. After faxing
in the Delayed Start mode is complete, the data in the memory is cleared.
Sending a Fax from the Driver (Direct Fax)
You can send a fax directly from your computer by using the driver.
Example
Procedure
1. Open the file you want to send by fax.
2. Open the print dialog box from the application, and then select Dell 2135cn MFP Fax.
3. Click Preferences.
NOTE: If you turn off and on the printer, the stored documents are sent as soon as the printer is activated.
NOTE: Only black and white faxes can be sent using Direct Fax.
NOTE: The names of the dialog boxes and the buttons may be different from those given in the following procedure depending on the application you
are using.