Dell 2135cn Color Laser Printer - Manual (Page 67)

Auto Reg Adjust
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Color Reg Adjust
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after the printer is moved.
Values:
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Toner Refresh
Purpose:
To clean the toner in each toner cartridge.
Drum Refresh
Purpose:
To clean the surface of the PHD unit.
Covers Thick
0*
-2 - +2
Label
0*
-2 - +2
Coated
0*
-2 - +2
Coated Thick
0*
-2 - +2
Envelope
0*
-2 - +2
On* Automatically performs color registration adjustment.
Off Does not automatically perform color registration adjustment.
NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off.
Auto Correct Automatically performs color registration correction.
Color Reg
Chart
Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the
values on the right side that are next to the straightest lines for each of the three colors. If the value for the straightest line is 0, color
registration adjustment is not required. If the value for the straightest line is any value other than 0, specify the adjustment values under
Lateral Adjustment
and Process Adjustment.
Enter
Adjustment
Lateral Adjustment
Y
-9 - +9
Specifies lateral (perpendicular to paper feed direction) color adjustment values individually for
Yellow, Magenta, and Cyan.
M
C
Process Adjustment
Y
-9 - +9
Specifies process (paper feed direction) color adjustment values individually for Yellow, Magenta,
and Cyan.
M
C
NOTE: Ensure that you remove the paper from the single sheet feeder before performing Auto Correct.