Dell 2135cn Color Laser Printer - Manual (Page 224)

Fax Settings
Auto Receive Fax/Tel
Displays the interval at which the printer goes into the fax receive mode after the external telephone receives
an incoming call.
Auto Receive
Answer/Fax Displays the interval at which the printer goes into the fax mode after the external answering machine receives
an incoming call.
Line Monitor
Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker
until a connection is made.
Ring Tone Volume
Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to Telephone/Fax.
Line Type Displays the line type; PSTN or PBX.
Tone/Pulse Displays whether to use tone or pulse dialing.
Resend Delay Displays the interval between resend attempts.
Redial Attempts Displays the number of redial attempts to make if the destination fax number is busy.
Redial Delay Displays the interval between redial attempts.
Junk Fax Setup Displays whether to reject faxes sent from unwanted stations.
Remote Receive Displays whether to receive faxes by pressing a remote receive code on the external telephone.
Remote Receive Tone Displays the 2-digit remote receive code when Remote Receive is On.
Fax Header Displays whether to print the sender's information on the header of faxes.
Fax Header Name Displays the sender's name that will be printed on the header of faxes.
Fax Settings
Fax Number Displays the fax number of the printer, which will be printed on the header of faxes.
Fax Cover Page Displays whether to attach a cover page to faxes.
DRPD Pattern Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Sent Fax Forward Displays whether to forward incoming faxes to a specified destination.
Fax Forward Number Displays the fax number of the destination to which incoming faxes are to be forwarded.
Fax Forward Print Displays whether to print forwarded faxes.
Fax Forward Error
Print
Displays whether to print only faxes that failed to be forwarded when Fax Forward Print is Off.
Prefix Dial Displays whether to set a prefix dial number.
Prefix Dial Number
Displays a prefix dial number. This number dials before any auto dial number is started. It is useful for
accessing the Private Automatic Branch Exchange (PABX).
Discard Size
Displays whether to delete text or images at the bottom of a fax page when the entire page does not fit onto
the output paper.
ECM Displays whether the Error Correction Mode (ECM) is enabled.
Modem Speed Displays the modem speed.
Fax Activity
Displays whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Fax Transmit Displays whether to print a transmission report after every fax transmission or only when an error occurs.
Fax Broadcast
Displays whether to print a transmission report after every fax transmission to multiple destinations or only
when an error occurs.
Fax Protocol
Displays whether to automatically print a protocol monitor report after every fax transmission or only when an
error occurs.
Country Displays the country where the printer is used.
Paper Density
Plain Displays the paper density of plain paper.
Label Displays the paper density of labels.
Adjust BTR
Plain Displays the voltage setting of the transfer roller (-6-6) for plain paper.
Plain Thick Displays the voltage setting of the transfer roller (-6-6) for thick plain paper.
Covers Displays the voltage setting of the transfer roller (-6-6) for cover paper.
Covers Thick Displays the voltage setting of the transfer roller (-6-6) for thick cover paper.
Label Displays the voltage setting of the transfer roller (-6-6) for labels.
Coated Displays the voltage setting of the transfer roller (-6-6) for coated paper.
Coated Thick Displays the voltage setting of the transfer roller (-6-6) for thick coated paper.
Envelope Displays the voltage setting of the transfer roller (-6-6) for envelopes.
Adjust Fuser
Plain Displays the temperature setting of the fuser (-2-2) for plain paper.
Plain Thick Displays the temperature setting of the fuser (-2-2) for thick plain paper.
Covers Displays the temperature setting of the fuser (-2-2) for cover paper.
Covers Thick Displays the temperature setting of the fuser (-2-2) for thick cover paper.
Label Displays the temperature setting of the fuser (-2-2) for labels.
Coated Displays the temperature setting of the fuser (-2-2) for coated paper.
Coated Thick Displays the temperature setting of the fuser (-2-2) for thick coated paper.
Envelope Displays the temperature setting of the fuser (-2-2) for envelopes.
Auto Registration Adjustment Displays whether to automatically perform color registration adjustment.
Adjust Altitude Displays the altitude of the location where the printer is installed.
Non-Dell Toner Displays whether or not to use another manufacturer's toner cartridge.
Date Format Displays the default date format.