Dell 2135cn Color Laser Printer - Manual (Page 26)

Paper Density
Purpose:
To specify the paper density settings.
Values:
Registration Adjustment
Purpose:
To set Color Registration Adjustment (individual yellow, magenta, cyan correction) settings. When Auto Registration Adjustment is set to On, the printer
prints the color registration chart and to adjust the color registration by using the chart. This function is required after the printer is set up or moved.
Values:
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Date Format Sets the date format. The default is yy/mm/dd.
Time Format Sets the time format in 24H or 12H.
Time Zone Sets the time zone.
Set Date Sets the date.
Set Time Sets the time.
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.
Plain
Normal*
Specifies plain paper density settings.
Light
Label
Normal*
Specifies label paper density settings.
Light
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.
Auto Registration Adjustment
Off Does not perform color registration automatically.
On* Performs color registration automatically.
Auto Correct Click Start to perform color registration automatically.
Color Regi Chart Click Start to print a color registration chart.
Color Registration Adjustment
1 (Lateral)
Yellow
-9-
+9
Specifies lateral (perpendicular to paper feed direction) color adjustment values that are found in the color
registration chart individually for Yellow, Magenta, and Cyan.
0*
Magenta
-9-
+9
0*
Cyan
-9-
+9
0*
Color Registration Adjustment
2 (Process)
Yellow
-9-
+9
Specifies process (paper feed direction) color adjustment values that are found in the color registration
chart individually for Yellow, Magenta, and Cyan.
0*
Magenta
-9-
+9
0*
Cyan
-9-
+9
0*
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.