Dell 2135cn Color Laser Printer - Manual (Page 234)

The Print Server Settings tab includes Basic Information, Port Settings, TCP/IP, E-Mail Alert, SNMP, and Scan To Network pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
System
Settings
Printer Name Specifies the name of the printer using up to 31 alphanumeric characters.
Location Specifies the location of the printer using up to 63 alphanumeric characters.
Contact Person
Specifies the contact name, number, and other information of the printer's administrator and service center using
up to 63 alphanumeric characters.
Administrator E-Mail
Address Specifies the contact address of the printer's administrator and service center using up to 63 alphanumeric
characters.
Asset Tag Number Enter the asset tag number for the printer.
EWS Settings
Auto Refresh Sets whether or not to automatically refresh the contents of the status display pages.
Auto Refresh Interval
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600
seconds.
NOTE: The Auto Refresh feature is effective for the contents of the top frame, Printer Status page, Job List page, and Completed Jobs page.
Ethernet
Ethernet
Settings
Auto Detects the Ethernet transmission rate and the duplex settings automatically.
10BASE-T Half-Duplex Selects 10Base-T Half-Duplex as the default value.
10BASE-T Full-Duplex Selects 10Base-T Full-Duplex as the default value.
100BASE-TX Half-Duplex Selects 100Base-TX Half-Duplex as the default value.
100BASE-TX Full-Duplex Selects 100Base-TX Full-Duplex as the default value.
Current Ethernet Settings Displays the current settings of the Ethernet.
MAC Address Displays the printer's MAC address.
Port
Status
LPD Select the check box to enable LPD.
Port9100 Select the check box to enable Port9100.
E-Mail Alert Select the check box to enable the E-Mail Alert feature.
SNMP Agent
Select the check box to enable the Simple Network Management Protocol (SNMP) agent.
You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport
protocol.
IPX is only available when the multi-protocol card is installed.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the settings, click the Apply
New Settings button to apply the new settings.
TCP/IP
Settings
Host Name Specifies the host name.
IP Address Mode Specifies the method for acquiring the IP address.
Manual IP Address
When an IP address is being set manually, the IP is allocated to the printer using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a gateway address.
Manual Subnet Mask
When an IP address is being set manually, the subnet mask is specified using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be specified as the
subnet mask.
Manual Gateway
Address
When an IP address is being set manually, the gateway address is specified using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a gateway address.