Dell UPS 10000R - Manual (Page 34)

34 |
Installation
NOTE: At initial startup, input voltage auto-sensing is enabled by default. After the subsequent startup,
auto-sensing is disabled until manually re-enabled by output voltage setting.
UPS Rear Panels
This section illustrates the rear panels of the three Dell Online Rack 10 kW UPS model options.
EBM
Connector Ground
Screw REPO
Ports UPS Communication
Bay RS-232
Port
Input Terminal
Block
USB
Port
One NEMA
L6-30R Outlet Two IEC 320-C19
Outlets
Two Output
Circuit Breakers
One NEMA
L6-30R Outlet Two IEC 320-C19
Outlets
Two Output
Circuit Breakers
Load Segment 1 (LS1) Load Segment 2 (LS2)
DELL10KWOLHVUS
Figure 24. 10 kW, 208V (DELL10KWOLHVUS) Rear Panel