Measurements – Dell UPS 10000R User Manual
Page 46
46
|
Operation
Measurements
The measurements screens provide useful measurement information on:
S
Output watts, VA, current, power factor, voltage, and frequency
S
Input voltage and frequency
S
Battery voltage, percentage charged, and time remaining
S
Instantaneous Headroom Watts remaining
S
Peak Headroom Watts (the remaining watts available to support the load at peak demand,
includes the date and timestamp of the peak demand)
S
Peak Consumption Watts (the peak power demand on the UPS, includes the date and timestamp
of the peak demand)
S
Present kWh Consumption (the kWh demand on the UPS averaged over the past hour)
S
Cumulative kWh Consumption (the total kWh usage, includes the date and timestamp since it
was last reset)
S
DC bus voltages (measured internal bus voltages for double conversion)
NOTE:
For Peak Consumption Watts and Cumulative kWh Consumption, input level is not supported.