Dell PowerEdge R815 User Manual
Page 109
Advertising
Installing System Components
109
5 Lift the expansion-card latch and remove the filler bracket. See
NOTE:
To install an expansion card in the expansion-card connector on the
6 Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector.
7 Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8 Replace the expansion-card latch. See Figure 3-16.
Figure 3-16. Installing and Removing an Expansion Card
1
expansion-card latch
2
expansion card
3
expansion-card connector
1
2
3
book.book Page 109 Wednesday, December 18, 2013 2:48 PM
Advertising