Dell PowerEdge R815 User Manual
Page 36
36
About Your System
E2110 Multibit
Error on DIMM
##. Reseat
DIMM.
The memory module in slot
"##" has had a multi-bit
error (MBE).
Reseat the memory
module in its socket.
If the problem persists,
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
The system BIOS disabled
memory single-bit error
(SBE) logging and will not
log any more SBEs until the
system is rebooted. "##"
represents the memory
module implicated by the
BIOS.
Reseat the memory
module in its socket.
If the problem persists,
E2112 Memory spared
on Card x
DIMM ##.
Power cycle
AC.
The system BIOS spared the
memory because it
determined that the
memory has too many
errors.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
I1910 Intrusion
detected.
Check chassis
cover.
System cover removed.
Replace the chassis cover
or ensure the chassis cover
is properly installed. See
I1911 LCD Log Full.
Check SEL to
review all
Errors.
LCD overflow message. A
maximum of ten error
messages can display
sequentially on the LCD.
The eleventh message
instructs the user to check
the SEL for details on the
events.
Check the SEL for details
on the events.
Remove AC power to the
system for 10 seconds or
clear the SEL.
I1912 SEL full.
Review &
clear log.
The SEL is full of events
and is unable to log any
more.
Check the SEL for more
information and then
clear the SEL.
Code
Text
Causes
Corrective Actions
book.book Page 36 Wednesday, December 18, 2013 2:48 PM