Dell 3130cn Color Laser Printer User Manual
Page 118
Panel Language
Specifies the language to be used on the operator panel.
French
Italian
German
Spanish
Dutch
Danish
Norwegian
Swedish
Auto Log Print
Off*
Does not automatically output a log of completed jobs from the printer.
On
Outputs a log of completed jobs from the printer automatically.
Print ID
Off*
Does not print the user ID.
Top Left
Prints the user ID on the specified location.
Top Right
Bottom Left
Bottom Right
Print Text
Off
Does not print the received PDL data as text data.
On*
Prints the received PDL data as text data.
Banner Sheet
Insert Position
Off*
Does not insert the banner sheet.
Front
Inserts the banner sheet to the specified position.
Back
Front & Back
Banner Sheet
Specify Tray
Tray 1*
Specifies the input tray to insert the banner sheet.
Tray 2*
2
MPF
RAM Disk*3
Disable
Does not allocate RAM for the disk file system. Secure Print, and Proof
Print jobs will abort and be recorded to the job log.
50-500MB*
4
Allocates RAM for the disk file system automatically.
50-1000MB*
5
Odd Page 2 Sided
1 Sided*
Prints the odd last page upside down to the paper
2 Sided
Prints the odd last page in normal direction to the paper
Substitute Tray
Off*
No tray size substitute accepted.
Larger Size
Substitutes paper of next largest size. When there is no larger paper size,
the printer substitutes paper of nearest size.
Nearest Size
Substitutes paper of nearest size.
MPF Feed
Substitutes paper in the MPF.
mm/inch
millimeter (mm)*
Selects millimeter or inch as the default measurement unit.
inch (")*
6
Apply New Settings
After you complete the settings, press the Apply New Settings button to
apply the changes.
Restart printer to apply new settings
Press the Restart printer to apply new settings button to apply the
changes.
*1 Enter 5 to put the printer in the power saver timer mode five minutes after it finishes a job. This uses much less
energy, but requires more warm-up time for the printer. Enter 5if your printer shares an electrical circuit with room
lighting and you notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate