Dell 3130cn Color Laser Printer - Manual (Page 123)

MPF Paper Size
Foilo (8.5 x 13")
Specifies the size of paper loaded in the MPF.
Legal (8.5 x 14")
Executive (7.25
x 10.5")
Monarch (3.875
x 7.5")
DL (110 x 220
mm)
C5 (162 x 229
mm)
Envelope #10
(4.125 x 9.5")
Postcard JPN
Youkei 2 (114 x
162 mm)
Youkei 3 (98 x
148 mm)
Youkei 4 (105 x
235 mm)
Youchoukei 3
(120 x 235 mm)
Choukei 3 (120 x
235 mm)
Custom Size
MPF Custom Size - Y
Specifies the length of custom size paper loaded in the MPF. The available range is from 127
mm (5.0 in.) to 355 mm (14.0 in.).
MPF Custom Size - X
Specifies the width of custom size paper loaded in the MPF. The available range is from 77 mm
(3.0 in.) to 220 mm (8.7 in.).
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to
apply new settings
Press the Restart printer to apply new settings button to apply the changes.
*1 This item is only available when the optional 550 sheet feeder is installed.
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
IP
Address
Mode
AutoIP*
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the
network is set as the IP address. The subnet mask is set as 255.255.0.0.
DHCP Sets the IP address using DHCP.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
Manually
Set
Manually sets the IP address.
IP Address
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254
cannot be specified for the first octet of a gateway address.