Dell 3130cn Color Laser Printer - Manual (Page 297)

Light 3
-Cb
Option value must be specified in the following order:
Cyan low density, Cyan medium density, Cyan high density, Magenta low density, Magenta medium density,
Magenta high density, Yellow low density, Yellow medium density, Yellow high density, Black low density,
Black medium density, Black high density
If no value is specified, it is treated as "0"(Normal).
For example, if you want to specify "Light 2" for Cyan medium density, "Dark 3" for Yellow high density, and
"Dark 2" for Black low density, it can be specified using either of the following:
-Cb=0:-2:0:0:0:0:0:0:+3:+2:0:0
-Cb=:-2:::::::+3:+2::
-Hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
store
Secure Print/Store Print
proof
Proof Print
UserID
Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Password
Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters).
DocumentName
Up to 12 single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A ":" (colon).
Secure Print
-Hld=store: UserID:Password:DocumentName
-Hld=store: UserID:Password:
Store Print
-Hld=store: UserID::DocumentName
-Hld=store: UserID::
Proof Print
-Hld=proof: UserID::DocumentName
-Hld=proof: UserID::
NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not
be available if you specify it when data need to be printed through another server or data need to be handled by
another program such as PostScript files. Collate is automatically specified when you specify Proof Print.
-Jown= jobownername: Password Authentication Setting
Specifies job owner name and password for authentication.
When only job owner name is specified (-Jown=jobownername:) (no password specified),
authentication password is treated as not specified.
When only password is specified (-Jown=:password) (no job owner name specified), login user name
is used as job owner name. Entered password is used as authentication password.
When neither of job owner name nor password is specified (-Jown=:), login user name is used as job
owner name, and authentication password is treated as not specified.
When a job owner name exceeds allowable character length, the extra characters are ignored.