Dell 3130cn Color Laser Printer - Manual (Page 256)

To print TIFF format files:
% lp -d dell3130cn -o TIF filename
To print PostScript files:
% lp -d dell3130cn filename
To print PostScript files as text files:
% lp -d dell3130cn -o TX filename
However, for PostScript files with options set up, such as paper selection, etc., when the same option is specified, it
will be ignored.
Authentication Printing
This section provides information on how to specify the user name used for authentication printing in the
environment variable.
Specifying the User Name
To specify the User Name for Authentication Printing:
You can specify a unique user name in the environment variable as follows.
% setenv JOWN3130U " jobownername"
You can specify the login name as the user name as follows.
% setenv JOWN3130U ""
NOTE: Up to 32 characters are acceptable for the user name. When a user name exceeds allowable character
length, the extra characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option has the
higher priority over authentication printing.
Specifying the Password
To Specify the Password for Authentication Printing:
If you need to specify the password in authentication printing, you can specify the password in the environment
variable as follows.
% setenv JOWN3130P "password"
If you do not specify the password inexplicitly, type as follows.
% setenv JOWN3130P ""
NOTE: Acceptable password length is between 4 and 12 characters. When an unacceptable character is specified for
password, or when a specified password is not within the range of the allowable character length, the extra
characters are ignored.
NOTE: If you specify the filter option when authentication printing is already specified, the filter option has the
higher priority over authentication printing.
NOTE: If you only specify the password without specifying the user name in the environment variable, the login
name is assumed as the user name.