Dell 3130cn Color Laser Printer - Manual (Page 34)

PFS Displays the PFS status.
Remote peers IPv4 address Displays the IP address to connect to.
Remote peers IPv6 address Displays the IP address to connect to.
Non IPsec communication policy Displays the status of the Non IPsec communication policy feature.
802.1x *1*3
Enable IEEE 802.1x Displays the status of IEEE 802.1x.
Authentication Method Displays the setting of authentication method for IEEE 802.1x.
IP Filter (IPv4)* 5 Access List Displays the list of IP addresses that are permitted or denied access to the printer.
* 1 This settings are not displayed when the optional wireless printer adapter is installed.
* 2 An optional wireless printer adapter is required to display the item.
* 3 An optional network protocol adapter is required to display the item.
* 4 This item is only available when using IPv6 dual mode.
* 5 This item is only available for LPD or Port9100.
NetWare Setup Page
Purpose:
To verify the current settings of IPX/SPX and Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
IPX/SPX Settings
Frame Type Displays the active frame type.
Current Frame Type Displays the current frame type.
Network Address Displays the IPX network address.
NetWare
Port Status Displays the port status. When NetWare is implemented, the status of IPX/SPX and TCP/IP is also displayed.
Device Name Displays the printer name.
Active Mode Displays the current mode for Active Mode.
Tree Name Displays the tree name.
Context Name Displays the context name of the Print Server Object.
File Server Name Displays the file server name.
Polling Interval Displays the time interval.
NCP Packet Burst Displays the status, and whether to use NCP packet burst.
Status Information Displays messages according to the conditions of the printer.
SLP Active Discovery Displays whether active discovery is enabled.
NOTE: An optional network protocol adapter is required to display the NetWare Setup page.
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in
the Print Server Settings tab.
Values:
E-Mail Server Settings
Port Status Displays the port status.
Primary SMTP Gateway Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
SMTP Port Number Displays the SMTP port number.
E-Mail Send Authentication Displays the authentication method for outgoing e-mail.
POP3 Server Address Displays the POP3 (Post Office Protocol 3) server address.
POP3 Port Number Displays the POP3 port number.
Reply Address Displays the IP address of servers connected with SMTP protocol when data is incoming.
SMTP Server Connection Displays the status of the SMTP server connection.
E-Mail List 1 Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 1.