Dell 3130cn Color Laser Printer - Manual (Page 248)

(left margin) are positive real numbers (up to two decimal points). The default is 0.
-y ps
The input file will be processed as the PostScript file. If the file does not begin with "%!", "%!" will be output
to the beginning line. Whether the file contains "%!" will be ignored.
To print text/PostScript files:
-y DuplexBook
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted
and both sides of the paper printed so that the longer edge of the pages can be bound.
-y DuplexList
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted
and both sides of the paper printed so that the shorter edge of the pages can be bound.
-y tray-input
The paper tray-related parameters that can be specified by the lp command are as follows.
tray1
Feed paper from tray 1 (Standard 250-sheet tray).
tray2
Feed paper from tray 2 (Optional 550-sheet feeder).
a4
Feed paper from the tray loaded with A4 (210 x 297 mm).
a5
Feed paper from the tray loaded with A5 (148 x 210 mm).
b5
Feed paper from the tray loaded with B5 (182 x 257 mm).
letter
Feed paper from the tray loaded with Letter (8.5 x 11 inches).
folio
Feed paper from the tray loaded with Folio (8.5 x 13 inches).
legal
Feed paper from the tray loaded with Legal (8.5 x 14 inches).
executive
Feed paper from the tray loaded with Executive (7.25 x 10.5 inches).
monarch
Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches).
com10
Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches).
dl
Feed paper from the tray loaded with DL (110 x 220 mm).
c5
Feed paper from the tray loaded with C5 (162 x 229 mm).
MxNmm
Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 76.2 to 220.0 mm
Length: 127.0 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users.