Dell 3130cn Color Laser Printer - Manual (Page 27)

Tray 2 Custom Size - X*3 Displays the width of custom size paper loaded in the tray 2.
MPF Mode Displays the paper size and type when paper is loaded in the multipurpose feeder (MPF).
Display Popup Displays a popup menu that prompts to set the paper size and type when paper is loaded in the MPF.
MPF Paper Type Displays the paper type setting of the MPF.
MPF Paper Size Displays the paper size setting of the MPF.
MPF Custom Size - Y Displays the length of custom size paper loaded in the MPF.
MPF Custom Size - X Displays the width of custom size paper loaded in the MPF.
* 1 This item is only available when the 512 MB, or higher, optional memory is installed, and also when the optional hard disk is not installed.
* 2 This item is only available when the optional duplexer is installed.
* 3 This item is only available when the optional 550 sheet feeder is installed.
Reports
Purpose:
To print various types of reports and lists.
Values:
Printer Settings Click the Start button to print the printer settings page.
Panel Settings Click the Start button to print the panel settings page.
PCL Fonts List Click the Start button to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
PCL Macro List Click the Start button to print the PCL Macro List.
Job History Click the Start button to print the Job History report.
Error History Click the Start button to print the Error History report.
PS Fonts List Click the Start button to print the PS Fonts List.
Print Meter Click the Start button to print the Print Meter report.
Color Test Page Click the Start button to print the Color Test Page.
Stored Documents Click the Start button to print the Stored Documents list.
This item is only available when the 512MB, or higher, optional memory is installed and the RAM Disk is set to on or the optional hard disk is installed.
Printer Settings
The Printer Settings tab includes System Settings, Parallel Settings, Network Settings, USB Settings, PCL Settings, PS Settings, and Panel Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Timer Mode 1 Sets the time for transition to Power Saver Mode 1.
Power Saver Timer Mode 2 Sets the time for transition to Power Saver Mode 2.
Control Panel Tone Specifies whether to enable the tone that is emitted when the operator panel input is correct.
Invalid Key Tone Specifies whether to enable the tone that is emitted when the operator panel input is incorrect.
Machine Ready Tone Specifies whether to enable the tone that is emitted when the printer becomes ready.
Job Completed Tone Specifies whether to enable the tone that is emitted when a print job is complete.
Fault Tone Specifies whether to enable the tone that is emitted when a job ends abnormally.
Alert Tone Specifies whether to enable the tone that is emitted when a problem occurs.
Out of Paper Alert Tone Specifies whether to enable the tone that is emitted when the printer runs out of paper.
Low Toner Alert Tone Specifies whether to enable the tone that is emitted when toner or some other consumable is low.
Base Tone Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop menu.
Fault Time-Out Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-out time is exceeded.