Dell 3130cn Color Laser Printer - Manual (Page 298)

When an unacceptable character is specified for job owner name, "Unknown User" is used as job owner
name.
NOTE: Characters acceptable for job owner name are alphanumeric characters and symbols, except for space and
colon.
NOTE: Up to 32 characters are acceptable for job owner name.
When an unacceptable character is specified for password, or when a specified password is not within
the range of the allowable character length, the authentication password is treated as not specified.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if authentication
setting is made with the environmental variable, it is used as setting information.
Example
To convert the XWD image into the PostScript language program and output it to a file, type as follows.
% xwd2ps2 file.xwd > file.ps
To output the XWD image to a printer, type as follows.
% xwd2ps2 file.xwd | lp
Important
When -s and -S are specified at the same time or when the same option is specified twice, the later setting will
prevail.
When the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the TIFF data as
one pixel of the printer.
If the print position option (-lleft bottom) specifies a point beyond the printable area of the printer, data beyond
the printable area will not be printed.
Precautions and Limitations
During Installation
Pay attention to the following points during the installation.
Solaris
Use lpadmin command to register the default printer.
# lpadmin -d PrinterName
To inhibit the banner sheets output, change the value of nobanner=no to nobanner=yes that includes in the file
corresponding to the printer name in /etc/lp/interfaces/.
The printer registered by UX filter must not be changed by admintool.
When Content types: postscript is displayed by typing lpstat -p printername -l, it's necessary to delete
the printer and reinstall.