Dell 2155cn/cdn Color Laser Printer - Manual (Page 108)

106 Setting the IP Address
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section08.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
The TCP/IP Settings page appears.
4 Select the mode from IP Address Mode, and then enter the values in IP
Address, Subnet Mask, and Gateway Address.
5 Press the Apply New Settings button to take effect.
You can also assign the IP address to the printer when installing the printer drivers
with the installer. When you use the Network Installation feature, and the Get
IP Address is set to AutoIP or DHCP on the operator panel menu, you can
set the IP address from 0.0.0.0 to the desired IP address on the printer selection
window.
Verifying the IP Settings
You can confirm the settings by printing the system settings report or using the
ping command.
Verifying the Settings Using System Settings Report
1 Print the system settings report.
When Using the Operator Panel
a Press the (Menu) button.
b Press button until System Setup is highlighted, and then press
the (Set) button.
c Ensure that Report/List is highlighted, and then press the (Set)
button.
d Ensure that System Settings is highlighted, and then press the
(Set) button.
The system settings report is printed.
When Using the Tool Box
NOTE:
a Click Start  All Programs  Dell Printers  Dell 2155
Multifunction Color Printer  Tool Box.