Dell 2155cn/cdn Color Laser Printer - Manual (Page 727)

Troubleshooting Guide 725
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section31.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Message appears on your
computer screen:
• "Device can’t be set to the
H/W mode you want."
• "Port is being used by
another program."
• "Port is Disabled."
• "Scanner is busy receiving
or printing data. When the
current job is completed, try
again."
• "Invalid handle."
• "Scanning has failed."
There may be a copying or printing job in progress.
When the current job is complete, try the job again.
The selected port is currently being used. Restart your
computer and try again.
The cable may be improperly connected or the power
may be off.
The scanner driver is not installed or an operating
environment is not set up properly.
Ensure that the port is properly connected and the power
is turned on. Then restart your computer.
Check that the USB or Ethernet cable is connected
properly.
The printer does not properly
transfer scan data to a
specified destination via the
Scan to E-mail or Scan to
Network feature. Check if the following settings have been set correctly
on the Dell Printer Configuration Web Tool.
Scan to Network
Check the following settings under Address Book 
Server Address:
• Server Address
• Share Name
• Server Path
• Login Name
• Login Password
Scan to E-mail
Check the following setting under Address Book E-
Mail Address:
• Address