Dell 2155cn/cdn Color Laser Printer - Manual (Page 313)

D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Copying 311
18
Copying
Loading Paper for Copying
The instructions for loading documents are the same whether you are printing,
faxing, or copying. For more details, see "Print Media Guidelines."
Selecting Paper Tray
After loading the print media for copy output, select the desired paper tray to be
used for the copy job.
To select the tray:
1 Press the (Copy) button.
2 Ensure that Select Tray is highlighted, and then press the (Set)
button.
3 Press or button until the desired tray is highlighted, and then press
the (Set) button.
You can select Tray 1, Tray 2 * , or SSF.
* Tray 2 is only available when the optional 250-sheet feeder is installed.
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to
load an original document for copying, scanning, and sending a fax. You can
load up to 35 sheets of 75 g/m
2 (20 lb) documents for one job using the ADF or
one sheet at a time using the document glass.
CAUTION: Avoid loading documents that are smaller than 5.5 in. by 5.5 in.
(139.7 mm by 139.7 mm) or larger than 8.5 in. by 14 in. (215.9 mm by 355.6 mm),
different sizes or weights together, or booklets, pamphlets, transparencies, or
documents having other unusual characteristics in ADF.
CAUTION: Carbon-paper or carbon-backed paper, coated paper, onion skin or
thin paper, wrinkled or creased paper, curled or rolled paper or torn paper cannot be
used in ADF.