Dell 2155cn/cdn Color Laser Printer - Manual (Page 518)

516 Understanding the Printer Menus
Manual Color Registration Adjustments are required when the printer is initially
installed and after the printer is moved.
NOTE: The Color Reg Adjust feature can be configured when Auto
Reg Adjust is set to Off .
Values:
NOTE: Ensure that you remove the paper from the single sheet feeder before
performing Auto Correct .
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Values:
Auto Correct Yes Automatically performs color registration correction.
No * Does not perform color registration correction.
Color Reg
Chart Yes Prints a color registration chart. The color registration
chart prints a lattice pattern of yellow, magenta, and
cyan lines. On the chart, find the values on the right
side that are next to the line that is perfectly straight for
each of the three colors. If the value for this line is 0,
color registration adjustment is not required. If the
value for this line is any value other than 0, specify the
adjustment values under
Lateral Adjustment
and Process Adjustment .
No * Does not print a color registration chart.
Enter Number LY -9 to +9 Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction)
color adjustment values individually for
Yellow, Magenta, and Cyan. Enter a number
in order of lateral adjustment (left), lateral
adjustment (right), and process adjustment.
Press the
(Set) button to save all the
settings.
LM
LC
RY -9 to +9
RM
RC
PY -9 to +9
PM
PC