Dell 2155cn/cdn Color Laser Printer - Manual (Page 396)

394 Faxing
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
When the document is loaded on the document glass, the display prompts
you for another page. Press
or button to select Yes to add more
documents or to select No to begin sending the fax immediately, and then
press the
(Set) button.
The printer starts dialing the number, and then sending the fax when the
remote fax machine is ready.
NOTE: You can cancel the fax job at any time while sending the fax by
pressing the (Cancel) button.
NOTE: Pressing the (Start) button does not start sending a fax when the
available time is set or the Fax service is locked. (For details, see "Set
Available Time" for the Available time and "Function Enabled" for the Fax
service.)
Sending a Fax Manually
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the (Fax) button.
3 Adjust the document resolution to suit your fax needs. (For details, see
"Adjusting the Document Resolution." For adjusting the contrast, see
"Adjusting the Document Contrast.")
4 Press button until OnHook is highlighted, and then press the (Set)
button.
5 Press or button until On is highlighted, and then press the (Set)
button.
6 Enter the remote fax machine's fax number using the numeric keypad.
7 If the document is loaded on the ADF, press the (Start) button.
If the document is not loaded on the ADF, press the (Start) button, press
or button until the desired setting is highlighted, and then press the
(Set) button.