Types of a usb memory, Specifying a folder to save the scanned image – Dell 2155cn/cdn Color Laser Printer User Manual

Page 371

Advertising
background image

Scanning

369

FILE LOCATION: C:\Users\fxstdpc-

admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section19.fm

D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY

Types of a USB Memory

You can use a USB memory with the following interfaces:

•

USB 1.1

•

USB 2.0

The USB memory must be formatted in FAT file systems (FAT16, FAT32, or
VFAT) before inserting the memory device into the USB port of the printer.

NOTE:

If the USB memory is formatted in a file system other than above, the

printer may not recognize that the USB memory is attached.

NOTE:

A USB memory with authentication feature and some brands of USB

memories cannot be used with this printer.

To store the scanned images to a USB memory:

1 Insert a USB memory into the USB port of the printer. See "Inserting and

Removing a USB Memory" for more details.

2 Load the document(s) facing up with top edge in first into the ADF.

OR

Place a single document facing down on the document glass, and close the
document cover.

For details about loading a document, see "Loading an Original Document."

3 Press the

(Scan) button.

4 Ensure that Scan to USB Memory is highlighted, and then press the

(Set) button.

5 Press the (Start) button to begin scanning the document.
6 Remove the USB memory from the printer. See "Inserting and Removing a

USB Memory" for more details.

Specifying a Folder to Save the Scanned Image

To save the scanned image to a USB memory, specify a folder in the USB
memory before executing the scan job.

1 Select a folder to save the scanned image from the printer operator panel.

NOTE:

The default saving location is the root directory of the USB memory.

NOTE:

You cannot directly enter a folder path using the numeric keypad.

Advertising