Dell 2155cn/cdn Color Laser Printer - Manual (Page 81)

Installing Optional Accessories 79
5 Select the network type from Infrastructure and Ad-Hoc.
6 Select the encryption type from No Security, WEP, WPA-PSK-AES, and
WPA-PSK-TKIP, and then set each item for the encryption type selected.
NOTE: For details on each item, see "Dell Printer Configuration Web Tool."
7 Click the Apply New Settings button to apply the settings.
8 When the operation is successful and the printer is rebooted, wireless LAN
connection setting is completed.
Constructing a New Wireless Network Environment for Your Computer
When you setup your wireless connection first time, the following settings are
required on your computer.
For DHCP network:
1 Setting up your computer for wireless connectivity:
NOTE: If your computer provides a wireless adapter tool, change the wireless
settings using this tool. Or you can change the wireless settings using the tool
provided with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a Select Network Connections from Control Panel.
b Right-click Wireless Network Connection and select Properties.
c Select the Wireless Networks tab.
d Ensure the check box for Use Windows to configure my wireless
network settings is checked.
NOTE: Be sure to write down the current wireless computer settings in step
e and step g so that you can restore them later.
e Click the Advanced button.
f Select Computer to Computer (ad hoc) networks only and close the
Advanced dialog box.
g Click the Add button to display Wireless network properties.
h Under the Association tab, enter the following information and click
OK.
Network name (SSID): dell_device