Dell 2155cn/cdn Color Laser Printer - Manual (Page 385)

Faxing 383
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Auto Rec Fax Sets the interval at which the printer goes into the fax receive
mode after receiving an incoming call. The interval can be
specified within the range of 0 to 255 seconds. The default is 0
second.
Auto Rec Tel/Fax Sets the interval at which the printer goes into the fax receive
mode after the external telephone receives an incoming call. The
interval can be specified within the range of 0 to 255 seconds.
The default is 6 seconds.
Auto Rec Ans/Fax Sets the interval at which the printer goes into the fax receive
mode after the external answering machine receives an
incoming call. The interval can be specified within the range of
0 to 255 seconds. The default is 21 seconds.
Line Monitor Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Ring Tone Volume Sets the volume of the ring tone, which indicates that an
incoming call is a telephone call through the internal speaker
when
Receive Mode is set to Telephone/Fax .
Line Type You can select the default line type.
• PSTN
• PBX
Tone/Pulse You can select the dialing type.
• Tone
• Pulse (10PPS)
• Pulse (20PPS)
Resend Delay You can specify the interval between transmission attempts
within the range of 3 to 255 seconds. The default is 8 seconds.
Redial Attempts You can specify the number of redial attempts to make when the
destination fax number is busy, within the range of 0 to 13. If
you enter 0, the printer will not redial.
Redial Delay Your printer can automatically redial a remote fax machine if it
was busy. Intervals from 1–15 minutes can be entered.
Option Description