Dell POWERVAULT MD3600F - Manual (Page 106)

106 Configuration: Disk Groups and Virtual Disks
5 In Advanced virtual disk parameters, you can select:
• Use recommended settings.
• Customize settings.
6 Click Next.
7 In the Customize Advanced Virtual Disk Parameters window, select the
appropriate Virtual Disk I/O characteristics type. You can select:
• File system (typical)
• Database
• Multimedia
• Custom
NOTE: If you select Custom, you must select an appropriate segment size.
8 Select the appropriate Preferred RAID controller module ownership and
click Next.
The Specify Virtual Disk-to-LUN Mapping window is displayed.
9 In the Specify Virtual Disk-to-LUN Mapping window, you can select:
• Default Mapping
• The appropriate Host type
• Map later Using Mappings View.
10 Click Finish.
The virtual disks are created.
Changing the Virtual Disk Modification Priority
You can specify the modification priority setting for a single virtual disk or
multiple virtual disks on a storage array.
Guidelines to change the modification priority of a virtual disk:
• If more than one virtual disk is selected, the modification priority defaults
to the lowest priority. The current priority is shown only if a single virtual
disk is selected.
• Changing the modification priority by using this option modifies the
priority for the selected virtual disks.
book.book Page 106 Tuesday, June 18, 2013 3:03 PM