Installing the raid controller module, Backup battery unit – Dell POWERVAULT MD3600F User Manual

Page 256

Advertising
background image

256

Management: Installing Array Components

Installing the RAID Controller Module Backup Battery Unit

CAUTION:

Many repairs may only be done by a certified service technician. You must

only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.

1 Align the backup battery unit with the slots on the RAID controller module.
2 Slide the backup battery unit toward the connector on the RAID

controller module.

3 Tighten the screw that secures the backup battery unit to the RAID

controller module.

4 Close the RAID controller module. See "Closing the RAID Controller

Module" on page 254.

5 Replace the RAID controller module. See "Installing a RAID Controller

Module" on page 252.

6 Connect all the cables to the array.
7 Turn on the array and the host server.

book.book Page 256 Tuesday, June 18, 2013 3:03 PM

Advertising
This manual is related to the following products: