Dell POWERVAULT MD3600F - Manual (Page 194)

194 Configuration: Premium Feature— Remote Replication
Creating a Remote Replication
Before creating a remote replication, ensure that all prerequisites are met. See
"Prerequisites" on page 191 for more information.
1 Open the AMW of both the local and remote storage array.
2 Verify that the Remote Replication premium feature is activated on both
storage arrays.
3 In the AMW of the local storage array, select the Logical tab.
4 In the Logical pane of the local storage array, select the virtual disk you
created to serve as your primary virtual disk. This is the disk that is
replicated to the secondary disk.
5 In the menu bar in the AMW, select Virtual DiskRemote–
ReplicationCreate.
The Introduction (Activate Remote Replication) wizard is displayed.
6 Click Next.
The Select Storage Array (Create Remote Replication) dialog is
displayed. The Storage Arrays list shows the remote storage arrays.
7 Select the storage array where you created the secondary virtual disk, then
click Next.
The Select Secondary Virtual Disk (Create Remote Replication) wizard is
displayed. Go to "Selecting the Secondary Virtual Disk" on page 195.
book.book Page 194 Tuesday, June 18, 2013 3:03 PM