Dell PowerEdge C1100 - Manual (Page 117)

Jumpers and Connectors 117
Figure 5-2. System Configuration Jumpers
NOTE: The "*" in the table of system configuration jumpers describes the default
status and the default state is not active state.
Table 5-1. System Configuration Jumpers
Jumper Function Off On
J21 Password Setting *Disable Enable
J24 CMOS Setting *Disable Enable
JP2 BMC Disable *Disable Enable
J21
J24
JP2
book.book Page 117 Tuesday, February 26, 2013 11:33 AM