Dell PowerEdge C1100 - Manual (Page 35)

Using the System Setup Program 35
2
Using the System Setup Program
Start Menu
The system employs the latest AMI Core BIOS, which is stored in the
Flash memory. The Flash memory supports the Plug and Play specification,
and contains a BIOS Setup program, the Power-On Self-Test (POST) routine,
and the PCI auto-configuration utility.
This system board supports system BIOS shadowing, enabling the BIOS to
execute from 64-bit onboard write-protected DRAM.
Configure items such as:
• Hard drives, diskette drives, and peripherals
• Password protection from unauthorized use
• Power management features
This Setup utility should be executed under the following conditions:
• When changing the system configuration
• When a configuration error is detected by the system and you are
prompted to make changes to the Setup utility
• When redefining the communication ports to prevent any conflicts
• When changing the password or making other changes to the security
setup
NOTE: Only items in brackets [ ] can be modified. Items that are not in brackets
are display only.
book.book Page 35 Tuesday, February 26, 2013 11:33 AM