Dell PowerEdge C1100 - Manual (Page 84)

84 Installing System Components
Figure 3-19. Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1 Place the power distribution board on the system and secure it with the
four screws. See Figure 3-19.
2 Connect the cables to the power distribution board. See Figure 5-7.
3 Connect the power distribution cables to the system board. See "System
Board" on page 96.
4 Install the expansion card riser. See "Installing the Expansion-Card Riser"
on page 70.
5 Install the power supplies to the system. See "Installing the Redundant
Power Supply" on page 83.
6 Install the cooling shroud. See "Installing the Cooling Shroud" on page 57.
7 Replace the system cover. See "Closing the System" on page 56.
8 Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 fan module cable connector 2 power distribution board
3 screws (4)
3
2
1
book.book Page 84 Tuesday, February 26, 2013 11:33 AM