Dell PowerEdge C1100 - Manual (Page 54)

54 Installing System Components
Removing a Hard-Drive Carrier
1 Press the button on the front of the hard-drive carrier to open
the release lever.
2 Using the release lever, slide the hard-drive carrier out of the
hard-drive bay. See Figure 3-4.
3 If you are not installing another hard-drive carrier, insert a hard-drive blank
in the vacated drive bay. See "Installing a Hard-Drive Blank" on page 52.
Figure 3-4. Removing and Installing the Hard-Drive Carrier
Installing a Hard-Drive Carrier
1 Press the button on the front of the hard-drive carrier.
2 With the release lever on the hard-drive carrier open, slide the hard-drive
carrier into the hard-drive bay until the carrier contacts the backplane.
3 Close the release lever to lock the hard-drive carrier in place.
See Figure 3-4.
1 hard-drive carrier handle 2 release button
1
2
book.book Page 54 Tuesday, February 26, 2013 11:33 AM