Dell PowerEdge C1100 User Manual
Page 22
22
About Your System
Table 1-7. System Identification Indicators
Table 1-8. Power Indicator Codes
Table 1-9. Fault Indicator Codes
System Identification Indicator
Condition
Steady blue
IPMI using chassis identify command on or
ID button press identification on.
Blinks blue blinking
Only IPMI using chassis identify command
blink on.
Blue off
IPMI using chassis identify command off or
ID button press identification off.
Power Indicator
Condition
Steady green
Power supply is on (AC OK/DC OK) or in
standby mode (90–264 VAC)
Steady yellow
Power supply faulty
(UVP/OVP/OCP/SCP/OTP/Fan Fault)
Yellow off
Power supply is off or AC input
voltage is out of normal operating range
(90 VAC–264 VAC)
Fault Indicator
Condition
Amber blinking
System failure
or
Non-critical failure: non-critical fan,
voltage, temperature state, or CPU thermal
trip.
Amber off
No system failure
or
Off
book.book Page 22 Tuesday, February 26, 2013 11:33 AM