Dell PowerEdge C1100 - Manual (Page 79)

Installing System Components 79
Figure 3-16. Removing and Installing the Mezzanine-Card Cover (10 GbE LAN)
Installing the Mezzanine Card (10 GbE LAN)
1 If you are installing a mezzanine card for the first time, remove the
two screws securing the mezzanine-card cover and remove the cover.
See Figure 3-16.
2 Align the spacer pins on the mezzanine card with the holes on the system
board.
NOTE: The three spacer pins must be inserted through the board for proper
installation of the mezzanine card.
3 Secure the board using the screw. See Figure 3-15.
4 Replace the riser card assembly. See "Installing the Expansion-Card Riser"
on page 70.
5 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 57.
6 Replace the system cover. See "Closing the System" on page 56.
7 Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 back panel 2 mezzanine-card cover
3 screws (2)
1
2
3
book.book Page 79 Tuesday, February 26, 2013 11:33 AM