Dell Managed PDU LED - Manual (Page 109)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
104
Create multiple global outlet groups
To set up multiple global outlet groups that link to outlet groups on other Rack PDUs:
1. From the Device Manager tab, select Information from the Outlet Groups left
navigation menu.
2. Make sure outlet groups are enabled and that the Multicast parameters (name
and IP address) are the same for all Rack PDUs to be linked. (See Enable
outlet groups .)
3. Click Create Global Outlet Groups .
4. For each global outlet group you create, select an outlet by clicking on its
checkbox. Then click Apply . For example, select five outlets to create five
outlet groups, each consisting of one global outlet.
5. To add outlets to any of the global outlet groups you created, see Edit or delete an
outlet group .
Edit or delete an outlet group
1. From the Device Manager tab, select Information from the Outlet Groups left
navigation menu.
2. Under Configured Outlet Groups , click the number or name of the outlet
group to edit or delete.
3. When editing an outlet group you can do any of the following:
• Rename the outlet group.
• Add or remove outlets by clicking the checkboxes to mark or unmark them.
4. To delete the outlet group, click Delete Outlet Group .
You cannot remove an outlet from an outlet group that contains
only two outlets unless the remaining outlet is a global outlet.