Dell Managed PDU LED - Manual (Page 114)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
109
Control actions you can select.
Option Description
No Action (Web interface only) Do nothing.
On Immediate Apply power to the selected outlets.
On Delayed Apply power to each selected outlet according to its
value for
Power On Delay . †
Off Immediate Remove power from the selected outlets.
Off Delayed Remove power from each selected outlet according to
its value for
Power Off Delay .
†
Reboot Immediate Remove power from each selected outlet. Then apply
power to each of these outlets according to its value
for
Reboot Duration .
†
Reboot Delayed Remove power from each selected outlet according to
its value for
Power Off Delay . Wait until all outlets are
off (the highest value for Reboot Duration ), and then
apply power to each outlet according to its value for
Power On Delay .
†
Cancel Pending Commands Cancel all commands pending for the selected outlets
and keep them in their present state.
N OTE : For global outlet groups, you can cancel a
command only from the interface of the initiator outlet
group. The action will cancel the command for the
initiator outlet group and all follower outlet groups.
† If a local outlet group is selected, only the configured delays and reboot duration of the lowest-
numbered outlet of the group are used. If a global outlet group is selected, only the configured
delays and reboot duration of the global outlet are used.