Dell Managed PDU LED - Manual (Page 232)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
227
RADIUS
To configure RADIUS, on the Administration tab, select Security on the top menu
bar. Then, under Remote Users on the left navigation menu, select RADIUS .
If two configured servers are listed and RADIUS, then Local Authentication or
RADIUS Only is the enabled authentication method, you can change which RADIUS
server will authenticate users by clicking the Switch Server Priority button.
Setting Definition
RADIUS
Server The server name or IP address of the RADIUS server.
N OTE : RADIUS servers use port 1812 by default to authenticate users. To use a
different port, add a colon followed by the new port number to the end of the
RADIUS server name or IP address
.
Secret The secret shared between the RADIUS server and the Rack PDU.
Reply
Timeout The time in seconds that the Rack PDU waits for a response from the RADIUS
server.
Test
Settings Enter the Administrator user name and password to test the RADIUS server path
that you have configured.
Skip Test
and Apply Do not test the RADIUS server path.