Dell Managed PDU LED - Manual (Page 113)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
108
Outlet Settings for Outlets and Outlet Groups
Initiate a control action
To control the outlets on your Rack PDU:
1. From the Device Manager tab, select Control from the left navigation menu.
2. Mark the checkboxes for each individual outlet or outlet group to control, or
select the All Outlets checkbox.
3. Select a Control Action from the list, and click Next >> . On the confirmation
page that explains the action, choose to apply or cancel it.
If you apply an outlet control action to outlets or outlet groups, the
following delays are used for the action:
• For an individual outlet (not in an outlet group), the action uses the
delay periods and reboot duration configured for that outlet.
• For a global outlet group, the action uses the delay periods and
reboot duration configured for the global outlet.
• For a local outlet group, the action uses the delay periods configured
for the lowest-numbered outlet in the group.