Dell Managed PDU LED - Manual (Page 173)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
168
These settings are the values used for the MIB-II sysName , sysContact , and
sysLocation Object Identifiers (OIDs).
Set the Date and Time
Method
Path: Administration > General > Date & Time > mode
Set the time and date used by the Rack PDU. You can change the current settings
manually or through a Network Time Protocol (NTP) Server:
•
Manual Mode : Do one of the following:
– Enter the date and time for the Rack PDU.
– Mark the checkbox
Apply Local Computer Time to match the date and time
settings of the computer you are using.
• Synchronize with NTP Server : Have an NTP Server define the date and time for the
Rack PDU.
For more information about MIB-II OIDs, see the Dell Management
Information Base (MIB).
Setting Definition
Primary NTP Server Enter the IP address or domain name of the primary NTP server.
Secondary NTP Server Enter the IP address or domain name of the secondary NTP server,
when a secondary server is available.
Time Zone Select a time zone. The number of hours preceding each time zone
in the list is the offset from Coordinated Universal Time (UTC),
formerly Greenwich Mean Time.
Update Interval Define how often, in hours, the Rack PDU accesses the NTP
Server for an update. Minimum: 1; Maximum: 8760 (1 year).
Update Using NTP Now Initiate an immediate update of the date and time by the NTP
Server.