Dell Managed PDU LED - Manual (Page 120)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
115
Edit, disable, enable, or delete a scheduled outlet event
1. At the Web interface, select the Device Manager tab and then Scheduling
from the left navigation menu.
2. In the event list in the Scheduled Outlet Action section of the Scheduling
page, click on the name of the event.
3. On the Daily/Weekly scheduled action detail page, you can do any of the
following:
– Change details of the event, such as the name of the event, when it is scheduled to
occur, and which outlets are affected.
– Under Status of event at the top of the page you can perform the following tasks:
• Disable the event, leaving all its details configured so that it can be re-enabled
later. A disabled event will not occur. An event is enabled by default when you
create it.
• Enable the event, if it was previously set to Disable .
• Delete the event, removing the event completely from the system. A deleted
event cannot be retrieved.
4. When you finish making changes on this page, click Apply to confirm the
changes or Cancel .