Dell Managed PDU LED - Manual (Page 143)

USER’S GUIDE
Ma
na
ge
d R
a
ck
PD
U
138
Configuring event actions
Notification parameters. For events that have an associated clearing event, you can
also set the following parameters as you configure events individually or by group, as
described in the next two sections. To access the parameters, click the receiver or
recipient name.
Configuring by event. To define event actions for an individual event:
1. Select the Administration tab, Notification on the top menu bar, and by event
under Event Actions on the left navigation menu.
2. In the list of events, review the marked columns to see whether the action you
want is already configured. (By default, logging is configured for all events.)
3. To view or change the current configuration, such as recipients to be notified by
e-mail or paging, or Network Management Systems (NMSs) to be notified by
SNMP traps, click on the event name.
Parameter Description
Delay x time
before sending If the event persists for the specified time, a notification is sent. If the
condition clears before the time expires, no notification is sent.
Repeat at an
interval of x time The notification is sent at the specified interval (e.g., every 2 minutes).
Up to x times During an active event, the notification repeats for this number of times.
Until condition
clears The notification is sent repeatedly until the condition clears or is resolved.
If no Syslog server is configured, items related to Syslog configuration are
not displayed.