Dell 3333/3335dn Mono Laser Printer - Manual (Page 186)

Menu item Description
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specifies whether an original document is duplex (two
‑sided) or simplex (one-sided),
and then specifies whether the copy should be duplex or simplex
Notes:
• 1 sided to 1 sided—The original page has printing on one side. The copied
page will have printing on one side.
• 1 sided to 2 sided—The original page has printing on one side. The copied
page will have printing on both sides. For example, if the original is six sheets,
the copy is three sheets with printing on both sides.
• 2 sided to 1 sided—The original page has printing on both sides. The copied
page will have printing on only one side. For example, if the original draft is
three sheets of paper with an image on each side of each sheet, then the copy
is six sheets with only one image on one side of each sheet.
• 2 sided to 2 sided—The original page has printing on both sides. The copy
mimics the original exactly.
Paper Saver
Off
2 on 1 Portrait
2 on 1 Landscape
4 on 1 Portrait
4 on 1 Landscape
Sets two or four sheets of an original document together on the same page
Note: Off is the factory default setting.
Print Page Borders
On
Off
Specifies whether a border is printed around the edge of the page at the margins
Note: On is the factory default setting.
Collate
On
Off
Keeps the pages of a print job stacked in sequence when making multiple copies of
the job
Note: On is the factory default setting.
Staple
On
Off
Enables stapling
Note: Off is the factory default setting.
Understanding printer menus 186