Dell 3333/3335dn Mono Laser Printer - Manual (Page 191)

Menu item Description
Negative Image
On
Off
Creates a negative image of the original document
Note: Off is the factory default setting.
Shadow Detail
0–4
Adjusts the amount of shadow detail visible on a copy
Note: 0 is the factory default setting.
Scan edge to edge
On
Off
Specifies if the original document is scanned edge-to
‑edge prior to copying
Note: Off is the factory default setting.
Sharpness
0–5
Adjusts the amount of sharpness on a copy
Note: 3 is the factory default setting.
Sample Copy
On
Off
Creates a sample copy of the original document
Note: Off is the factory default setting.
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job by way of a telephone line.
General Fax Settings
Menu item Description
Station Name Specifies the name of the fax within the printer
Station Number Specifies a number associated with the fax
Station ID
Station Name
Station Number
Specifies how the fax is identified to recipients in the fax header
Enable Manual Fax
On
Off
Sets the printer to fax manually only, which requires a line splitter and a telephone
hand set
Notes:
• Use a regular telephone to answer an incoming fax job and to dial a fax
number.
• Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Understanding printer menus 191