Packing material may be on the toner cartridge, The toner may be low, Characters have jagged or uneven edges – Dell 3333/3335dn Mono Laser Printer User Manual
Page 281: Check the print quality settings, Make sure downloaded fonts are supported, Blank pages
7
Touch Back.
8
Touch Exit Configuration.
Blank pages
These are possible solutions. Try one or more of the following:
P
ACKING
MATERIAL
MAY
BE
ON
THE
TONER
CARTRIDGE
Remove the toner cartridge and make sure the packing material is properly removed. Reinstall the toner cartridge.
T
HE
TONER
MAY
BE
LOW
When 88 Cartridge Low appears, order a new toner cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.
Characters have jagged or uneven edges
These are possible solutions. Try one or more of the following:
C
HECK
THE
QUALITY
SETTINGS
•
Change the Print Resolution setting in the Quality menu to 600 dpi, 1200 Image Q, 1200 dpi, or 2400 Image Q.
•
Enable Enhance Fine Lines in the Quality menu.
M
AKE
SURE
DOWNLOADED
FONTS
ARE
SUPPORTED
If you are using downloaded fonts, then verify that the fonts are supported by the printer, the host computer, and
the software program.
Troubleshooting
281