Dell 3333/3335dn Mono Laser Printer - Manual (Page 195)

Menu item Description
Redial Frequency
1–200
Specifies the number of minutes between redials
Note: 3 is the factory default setting.
Behind a PABX
Yes
No
Enables switchboard blind dialing without a dial tone
Note: No is the factory default setting.
Enable ECM
Yes
No
Enables Error Correction Mode for fax jobs
Note: Yes is the factory default setting.
Enable Fax Scans
On
Off
Lets you send faxes by scanning at the printer
Note: On is the factory default setting.
Driver to fax
Yes
No
Allows driver to fax jobs to be sent by the printer
Note: Yes is the factory default setting.
Allow Save as Shortcut
On
Off
Lets you save fax numbers as shortcuts in the printer
Note: On is the factory default setting.
Dial Mode
Tone
Pulse
Specifies the dialing sound, either as a tone or a pulse.
Note: Tone is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specifies the maximum speed in baud at which faxes are sent
Note: 33600 is the factory default setting.
Custom Job scanning
On
Off
Lets you scan a document that contains mixed paper sizes into a single file
Notes:
• A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
• On is the factory default setting.
Scan Preview
On
Off
Specifies whether a preview will appear on the display for scan jobs
Notes:
• A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
• Off is the factory default setting.
Background Removal
‑4 to +4
Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Understanding printer menus 195