Dell 3333/3335dn Mono Laser Printer - Manual (Page 291)

Transparency print quality is poor
Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1 From the printer control panel Paper menu, check the Paper Type setting.
2 Before sending the job to print, specify the correct type setting:
• For Windows users, specify the type from Print Properties.
• For Macintosh users, specify the type from the Print dialog.
Uneven print density
Example Cause Solution
Toner cartridge is worn or defective. Replace the toner cartridge.
Photoconductor is worn or
defective. Replace the photoconductor.
Embedded Web Server does not open
These are possible solutions. Try one or more of the following:
C
HECK THE NETWORK CONNECTIONS
Make sure the printer and computer are turned on and connected to the same network.
C
HECK THE NETWORK SETTINGS
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP
address to access the Embedded Web Server. For more information, see your system administrator.
Contacting Technical Support
When you call Technical Support, describe the problem you are experiencing, the message on the display, and the
troubleshooting steps you have already taken to find a solution.
Troubleshooting 291